STRaND-1 磁場ベクトル解析 by DK3WN
私は軌道シミュレーションソフトウェアの開発を終了し、いくつか興味深い解析を
しました。添付の 4つの図を参照してください。それは Colin - オーストラリア・
Ken - アメリカ西海岸・Mineo - 日本・そして Mike - ドイツの解析結果の図です。
WMM2010モデルから計算された F値(地球磁場強度)と、衛星STRaND-1 によって送信
された (x, y, z軸の磁場から計算された)実際の F値を見ることができます。それ
は、ここヨーロッパと日本の違いがわかって大変興味深いものです。(訳注,緑:WMM
2010モデルF値、青:STRaND-1実測F値。なお、WMMモデル2010 については補足参照)
私は後で、実際の F値カーブを滑らかにするため、Spline関数を追加しようと考え
ています。また、メルカトル図法への y軸変換に問題があるようで、世界磁場地図
のプロットはそれほど正確ではありません。後で修正しようと思います。
Chris によると、磁場テレメトリ値が測定されていないようなので、磁力計からの
生の値なのか疑問だということです。
さらに私は、テレメトリデコーダソフトウェアを最適化しました。私は OBCの時間
調整値を計算し、"本当の"時間を再計算できるようにしました。このようにして私
は、Mineo と Ken のテレメトリファイルのタイムスタンプを得ました。 Colin と
私は、KISSファイルにタイムスタンプを追加するソフトウェアを使って、後で処理
するための正確な時間を持っています。
[原文]
Subject: STRaND-1 magnetometer data analysis
From: Mike Rupprecht
Date: Fri, 29 Mar 2013 19:45:50 +0100
Hi all,
I finished my orbit simulation software and did some interesting analyses.
See attached 4 screenshots. These data are from Colin - Australia, Ken-
West Coast US, Mineo - Japan und Mike.
You can see the calculated F value from the WMM2010 model and the real F
(calculated by mag x, y, z) sent by STRaND. It is very intersting to see
the deviation here in Europe and in Japan.
Maybe I will add a spline function to smooth the real F curve later.
The plots in the world mag map are not very precise because I have some
issues with the y conversion into mercator projection. Will fix that later.
@Chris: I assume the mag telemetry values are not calibrated, so we have
the raw values from the magnetometer?
Additionally I optimized the telemetry decoder software. I calculated
the time offset of the OBC clock and can now recalculate the "real" time.
In this way I got the timestamp for Mineo's and Ken's telemetry file.
Colin and I using a software which adds a timestamp to the kiss file -
so we have a accurate time for later processing.
So, I wish you all a great Easter time.
Best wishes
Mike
[補足1]
World Magnetic Model
NOAA National Geophysical Data Center
http://www.ngdc.noaa.gov/geomag/WMM/DoDWMM.shtml
[補足2]
DK3WN STRaND-1 Decoder V1.7 にさらにアップデート