10:47-11:00JST, 10 May 2014, Ele 76 ES-Z-WN, 437.479MHz 9600bps GMSK
How to decode MCubed-2 using MixW
(1) Setup MixW serial port bridge and Device Manager
http://www.ne.jp/asahi/hamradio/je9pel/mixwbrid.htm
(2) Setup MixW Mode and Configure
Mode ... Packet
Mode settings ... Modem, VHF 9600 baud G3RUH
Mode settings ... General, Check Emulate KISS TNC on TNC emulation port
Configure ... Sound device settings, Samplerate 22050
Configure ... TNC emulation, Port COM7*, Baud rate 9600
(3) Install Python 2.7
https://www.python.org/download/
(4) Install MCubed-2 Decoder
http://exploration.engin.umich.edu/blog/?page_id=1933
(5) Run setup_pyserial.bat in MCubed-2 folder
(6) Edit run_serial_to_tcp.bat in MCubed-2 folder
tcp_serial_redirect.py -q -p COM8 -b 9600 --rtscts -P 12500 -i 0 -n JE9PEL
(7) Edit config.props in MCubed-2 folder
client.callsign=JE9PEL
(8) Run MCubed-2 Decoder in the following order
1. run_serial_to_tcp.bat
2. run_gs_client.bat