UWE-3 Online Decoder2014年05月10日 10時33分

09:56-10:09JST, 10 May 2014, Ele 62 NE-E-S, 436.395MHz 9600bps FSK
UWE-3 Online Telemetry Decoder (by DK3WN) を、初めて試してみました。
この Decoder は最初に、online_conf.ini を編集する必要があります。
自局では UWE-3 はいつも、せいぜい数個しかデコードすることができません。
このパスでも 1個だけでした。受信デコードできると、自動的に管制局サーバー
にデータが送られます。自局フォルダには KISSファイルも出来ています。

MCubed-2 using MixW2014年05月10日 17時44分

10:47-11:00JST, 10 May 2014, Ele 76 ES-Z-WN, 437.479MHz 9600bps GMSK

How to decode MCubed-2 using MixW

(1) Setup MixW serial port bridge and Device Manager
    http://www.ne.jp/asahi/hamradio/je9pel/mixwbrid.htm

(2) Setup MixW Mode and Configure

    Mode ... Packet
    Mode settings ... Modem, VHF 9600 baud G3RUH
    Mode settings ... General, Check Emulate KISS TNC on TNC emulation port
    Configure ... Sound device settings, Samplerate 22050
    Configure ... TNC emulation, Port COM7*, Baud rate 9600

(3) Install Python 2.7
    https://www.python.org/download/

(4) Install MCubed-2 Decoder
    http://exploration.engin.umich.edu/blog/?page_id=1933

(5) Run setup_pyserial.bat in MCubed-2 folder

(6) Edit run_serial_to_tcp.bat in MCubed-2 folder
    tcp_serial_redirect.py -q -p COM8 -b 9600 --rtscts -P 12500 -i 0 -n JE9PEL

(7) Edit config.props in MCubed-2 folder
    client.callsign=JE9PEL

(8) Run MCubed-2 Decoder in the following order
    1. run_serial_to_tcp.bat
    2. run_gs_client.bat