Multimon という 3rd party製のデコーダーをインストール中。
インストールの GUI画面まで起動するが、ここから変化がなく先に進まない。
The multimon software can decode a variety of digital transmission modes
commonly found on UHF radio. A standard PC soundcard is used to acquire
the signal from a transceiver. The decoding is done completely in software.
Currently, the following modes are supported:
AX.25
1200 Baud AFSK
2400 Baud AFSK (2 variants)
4800 Baud HAPN
9600 Baud FSK (G3RUH)
POCSAG
512 Baud
1200 Baud
2400 Baud
Miscellaneous
DTMF
ZVEI
SCOPE
An arbitrary set of the above modes may run concurrently on the same input
signal (provided the CPU power is sufficient), so you do not have to know
in advance which mode is used. Note however that some modes might require
modifications to the radio (especially the 9600 baud FSK and the POCSAG
modes) to work properly.
AX.25 - Amateur Packet Radio protocol datagram format
POCSAG- (Post Office Code Standards Advisory Group) is a common paging transmission format.
DTMF - Dual Tone Multi Frequency. Commonly used in in-band telephone dialing.
ZVEI - The German Electrical and Electronic Manufacturer's Association paging tone format.
SCOPE - show samples in a rudimentary oscilloscope display on an X server.