#10928709
PARUS-T1 is dedicated to receive APRS signals on three major global frequencies:
144.640 MHz, 144.390 MHz, and 144.800 MHz. Record the Received Signal Strength
Indicator (RSSI) data for each received APRS packet. Utilize a Global Navigation
Satellite System (GNSS) receiver to determine the CubeSat's orbit location during
signal reception. Store the received APRS data, RSSI values, and corresponding
location data in the On- Board Computer (OBC) memory. Transmit the stored data to
ground station. Students will also be extensively involved in mission data analysis
and will gain hands on experience in understanding ionospheric propagation and its
impact on terrestrial and satellite radio communications. The beacon packets shall
not be encrypted and made public to the community via websites. Community partici_
pation will be encouraged through online leaderboards for example SatNOGS network.
PARUS-T1 has an APRS digipeater to provide global amateur activities at the same
frequency of ISS APRS channel 145.825MHz. Data format of PARUS-T1 health telemetry
and payload raw data will also be published and welcome all amateurs to receive
436.850MHz for packet data of AX.25 protocol on 1200bps. The APRS payload will
receiving signal strength RSSI for major 3 global APRS frequency, and data
downlink for VHF propagation analysis. @IARU.AMSAT-UK
PARUS-T1 は、3つの主要なグローバル周波数(144.640MHz,144.390MHz,144.800MHz)
でAPRS信号を受信することに専念している。受信した各APRSパケットの受信信号強度
インジケータ(RSSI)データを記録する。グローバルナビゲーション衛星システム(GNSS)
受信機を使用して、信号受信中にCubeSatの軌道位置を決定する。受信したAPRSデータ、
RSSI値および対応する位置データをオンボードコンピュータ(OBC)メモリに保存する。
保存されたデータは地上局に送信する。学生はミッションデータの分析にも幅広く関与
し、電離層の伝播とそれが地上および衛星無線通信に与える影響を理解するための実践
的な経験を積むことになる。ビーコンパケットは暗号化されずに、Webサイトを通じて
コミュニティに公開される。コミュニティの参加は、SatNOGSネットワークなどのオン
ラインリーダーボードを通じて奨励される。PARUS-T1 にはAPRSデジピーターが搭載さ
れており、ISS_APRSチャネル145.825MHz と同じ周波数で世界中のアマチュア活動に
利用できる。PARUS-T1ヘルステレメトリのデータ形式とペイロードの生データも公開
され、すべてのアマチュア無線家が1200bpsで AX.25プロトコルのパケットデータを
受信するために 436.850MHz で受信できる。APRSペイロードは、主要な3つのグロー
バルAPRS周波数の信号強度RSSIと、VHF伝搬分析用のデータダウンリンクを受信する。