LINUX USB boot #62019年01月06日 09時36分

最後に、周波数自動追尾のために Gpredict をインストールする。
以下の手順で、最後の画像の所まで辿り着く。 外国局のサンプル画像を見ると
ここで、Gpredict のダウンリンク周波数が GQRX に反映している様子が伺える。
しかし、自局では GQRX ⇔ Gpredict がうまく連動しない。 以前も同様の症状
であった。最後の画像の赤矢印の部分である。 この問題が、今後の課題である。

    > Gpredict の Doppler は時々刻々と変化しているにも関わらず、
    > Radio の箇所に連動しない。Settings - Engageボタンを押すと
    > 数回は反応し数値が変化するが。さらに、Downlink - Radio の
    > 周波数が Gpredict に連動せず変化しない。これが最も重症。

       

73. Gpredict installing
74. Search in your applications -> Gpredict
75. Gpredict -> Edit -> Preferences -> Ground Stations
76. Gpredict -> Edit -> Update TLE -> From network
77. Gpredict -> File -> New Module -> ISS etc.
78. Set the host and port on Gprecict and GQRX as shown above
79. Gpredict -> Edit -> Preferences -> Interfaces -> Radios -> Add New
80. GQRX -> Tools -> Remote control settings -> host, port etc.
81. Triangle button in the upper right of Gpredict -> Radio Control
82. Set the satellite frequencies, and press Engage & Track button
83. Then it will begin the automatic tracking of Doppler shift

ESEO New_Year telemetry2019年01月06日 14時48分

AOCS telemetry General telemetry
31 Dec 2018 2 Jan 2019

LINUX FM_Radio using GRC2019年01月06日 16時41分