WiSP virtual connection to MixW with VSPE #52010年02月15日 23時56分

外付け soundcard の MixW PTT/CAT 設定について、重要な示唆がありました。
ここまでを暫定的に、下記 my_web page(英語版) にまとめました。これで完璧です。

Subject: WiSP virtual connection to MixW with VSPE
From: Mineo Wakita, JE9PEL
To: Nader Omer, ST2NH
Date: Monday, February 15, 2010, 2:56 AM

Please see the following my web page,
http://www.ne.jp/asahi/hamradio/je9pel/wispvspe.htm

I had setup VSPE, MixW, and WiSP.
I use usually an external soundcard on COM2.
So I had setup the virtual serial port of VSPE in COM4.

When I request 'Fill Directory' on WiSP(MSPE), I can hear
the sound of that request in my PC and I can see some messeges
in MixW. But my rig does not do the uplink work. Why?

--------------------------------------------------------------

Re: WiSP virtual connection to MixW with VSPE
From: Nader Omer
To: Mineo Wakita
Date: Mon, 15 Feb 2010 05:08:08 -0800 (PST)

It is look like you have some problem in MixW keying port!!

keying setup as following:-
 
Configuer --> TRCVR CAT/PTT --> CAT NONE --> PTT&CAT INTERFACE
 --> (SELECT HERE YOUR KEY COM)

Notice Cat is disabled and all other com port at mixw were
disabled except emulator kiss port for VSPE and PTT port.

Tx and Rx audio direct from radio data socket to soundcards.